Brand: In The Swim
- Ideal for use on Plaster, Gunite, Concrete, and Fiberglass gel-coat surfaces
- A single application can last up to 7 - 8 years
- Delivers a stain-resistant, tile like finish
- Please Note: Epoxy Primer is required for new applications
- Coverage: 125 - 150 sq ft per gallon on average
Details: In The Swim Super Poxy Shield pool paint is the highest-quality epoxy pool coating available. A single coat lasts up to 8 years. If you are painting a bare surface, please make sure you prime the surface before rolling the Super Poxy Shield. Super Poxy Shield over an Epoxy Primer will deliver a stain-resistant, tile-like finish on the pools interior. Due to the tile-like finish, we suggest sprinkling sand on the coating before it dries for steps, shallow areas and wading pools. This will make these areas slip-resistant. Start rolling paint with the walls of the pool first and finish with the floor last. Coverage: Approximately 125 - 150 square feet average per gallon. Should be applied liberally using a 1/2" nap roller cover. Pot Life: 30 minutes at 85°F and above. Curing time will vary depending on the outside ambient air temperature. If the outside ambient air temperature is 60 - 65° F cure time will be 6 days. For every 5° F lift in outside ambient air temperature that will cut a day off of the cure time.
Package Dimensions: 11.9 x 10.8 x 7.7 inches
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.